Cantel Medical

Equipment Maintenance Technician

US-MN-Plymouth
Job ID
2017-3479
# Positions
1
Category
Facilities
Cantel ENDO

Company Overview

CANTEL MEDICAL IS A LEADING PROVIDER OF INFECTION PREVENTION PRODUCTS AND SERVICES IN THE HEALTHCARE MARKET, SPECIALIZING IN THE FOLLOWING OPERATING UNITS: 

ENDOSCOPY

Endoscopy procedure disposables include single-use valves and irrigation tubing. Medical device reprocessing systems, disinfectants, detergents and other supplies are used to disinfect high-level endoscopes. This segment is operated through MEDIVATORS.

WATER PURIFICATION AND FILTRATION

Water purification systems for dialysis facilities, including hemodialysis dialyzer and reprocessing systems, as well as sterilants and filtration products. This segment is operated through Mar Cor Purification, Inc.  and MEDIVATORS.

HEALTHCARE DISPOSABLES

Single-use, infection prevention products used primarily in the dental market including face masks, sterilization pouches, towels and bibs, tray covers, saliva ejectors, germicidal wipes, plastic cups and disinfectants. This segment is operated through Crosstex International, Inc.

Job Overview

As an employee, the incumbent will support the mission, vision and values of Medivators and be familiar with and abide by all Medivators policies and procedures. Medivators employees will conduct themselves in a manner that reflects the values of Medivators. Medivators employees will present themselves in a professional manor and be helpful and courteous at all times.

Provide the Manufacturing departments and Manufacturing Engineering departments with support on various production related projects and activities. Develop preventive maintenance job plans for manufacturing equipment; maintain manufacturing equipment to a high level of quality to produce products according to schedule.

Shift hours are 9:30pm-6:00am starting Monday night and working through Friday night.

Main Responsibilities

  • Provide necessary skills for manufacturing equipment repair and maintenance. Must have the basic skills to repair automated manufacturing equipment for liquid and powder dispensing machines, cappers, fluid and powder material handling systems, bag forming, labeling, printing, case erection, taping, stacking, robotics, heat sealing and conveyors.
  • Must have the basic skills to repair and maintain material handling equipment for liquid and powder materials. Basic knowledge of pumps, motors, gear boxes/transmissions, compressed air systems and other related equipment.
  • Must have the computer skills to efficiently work within Word, Excel, email systems, programmable logic controllers (PLC), variable frequency drives (VFD) and computerized maintenance management systems (CMMS).
  • Must have the skills to read and understand the English language, schematics, electrical and pneumatic diagrams.
  • Maintains records in a CMMS for equipment maintenance and operation to satisfy FDA, ISO, OSAHA, ADA, NFPA and IBC standards. Will use the Mainsaver computerized maintenance management system and other programs to maintain documentation to meet these requirements.
  • Performs other duties as assigned.

Qualifications

 

Supervision/Work Direction:

It is expected that the incumbent will have the ability to work independently as well as in a team environment and set work priorities. From time to time will schedule and direct venors/contractors on an occasional basis for maintenance, repair, replacement and testing of equipment and systems, under the supervision of other Production Equipment Maintenance Technicians, the Facilities & Maintenance Manager and Manufacturing Engineering staff. 

 

Internal/External Contacts:

Internal – Daily contact with production maintenance staff and a variety of manufacturing personnel.

External –From time to time will have contact with vendors and contractors with a wide variety of responsibilities to include plumbing, electrical, and production equipment manufacturers, under the supervision of the Facilities & Maintenance Manager and Manufacturing Engineering staff.

 

Education/Experience:

 

  • Requires a high school diploma or equivalent.
  • Requires two years vocational college in automation and manufacturing equipment repair and maintenance.
  • Entry level to three years of related work experience required.
  • Must have understanding and basic working knowledge of automated manufacturing equipment and related systems.
  • Must be able to read and understand blue prints, electrical diagrams, mechanical diagrams and schematics.

 

Job Complexity:

 

Works on assignments that are simple to moderately complex in nature, setting workload priorities and meeting deadlines.  Must have flexibility in ability to work multiple shifts to provide coverage to meet production department demands.

 

Special Knowledge/Skills:

 

  • Must have basic electrical and mechanical troubleshooting skills and basic knowledge in the care and use of power equipment.  Should possess a good electrical and mechanical aptitude, with knowledge in the operation of automated manufacturing equipment and electronic control systems.
  • Knowledge of basic machine designs, process equipment, polymer pumps, and heating systems.  Electrical controls including design, panel building, electrical controls, and elementary diagrams.
  • Must have the basic knowledge of test equipment used in troubleshooting production equipment, such as volt ohm meters, clamp on amp probes and other related test equipment.
  • Must have basic knowledge in machine tools to safely setup and operate equipment.
  • Must have basic knowledge in materials used in the manufacture of machines used for medical device manufacturing process.
  • Must have the ability to perform the physical requirements of the position. Must be able to walk, stand, crawl, stoop, crouch, bend or reach above and below shoulders height frequently. Requires the ability to lift things such as motors and pumps weighing over 50 pounds. This job requires frequent twisting and turning of the body and the use of both hands.

 

Certificates and Licenses Required: 

 

  • Requires valid driver’s license.

 

Machines/Equipment/Software Utilized:

 

  • Must be familiar with and use of safety practices for equipment lock-out/tag-out and use of personnel protection equipment (PPE).
  • Must be able to us a personal computer and be familiar with Microsoft Word, Excel and Outlook.
  • Will be working with computerized maintenance management system, Mainsaver.
  • Will be working with computer aided drawing (CAD) system, AutoCAD.
  • Will be working with programmable logic controllers (PLC), variable frequency drives (VFD), AC/DC drives and other electronically controlled equipment.

Minimum Qualifications

Cantel Medical company is an Equal Employment Opportunity/Affirmative Employer. Women, minorities, veterans, and individuals with disabilities as well as other qualified individuals are encouraged to apply. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or national origin or other protected class status.

Options

Sorry the Share function is not working properly at this moment. Please refresh the page and try again later.
Share on your newsfeed